– 4 –
GENERAL OPERATION
To make sure the latest system status is displayed, press the [
*
] key before and after entering each command.
HOW TO GET SYSTEM STATUS
The display continuously displays the present security system status. When there is a change in system
status (such as going from an ARMED STAY to DISARMED), it may take up to 20 seconds for the display to
automatically update the status to show the status change. However, you can press the [*] key to update the
display immediately.
ARMING THE SYSTEM
To arm the system in the AWAY, STAY, INSTANT or MAX mode, enter your user code and press the
numeric key above the selected mode.
DISARMING THE SYSTEM
To disarm the system enter your user code +
OFF
key [1].
BYPASSING ZONES
To bypass an individual zone, enter your user code +
BYPASS
key [6] + faulted zone number of the zone to
be bypassed. To bypass multiple zones, enter the command string (user code + BYPASS key [6]) then
sequentially enter the 3-digit zone numbers of the zones to be bypassed, up to five zones in each command.
Multiple Zone Bypass Example: user code + BYPASS [6] + 003 004 005 007 009.
If you want to bypass all faulted zones (Forced Bypass), enter your user code +
BYPASS
key [6] + [#] + [0].
The Forced Bypass feature must be enabled by your installer: [ ] yes [ ] no
USER CODES
To Add a User
IMPORTANT:
Temporary users should not be shown how to use any system function they do not need to
know (e.g. bypassing protection zones).
Enter Master code +
CODE
key [8] + 2-two digit user no. + 4-digit new user’s code.
User numbers 02 through 96 are available with various authority levels. User no. 01 is for the Master code.
AUTHORITY LEVEL:
Enter Master code +
CODE
key [8] + 2-digit user no. + [#] + [1] + single-digit authority level.
For authority levels, see definitions below.
Level
Title
Explanation
N/A
Master
Reserved for user 01; Can perform all system functions and assign codes.
0
Standard User Can only perform security functions.
Cannot perform system functions reserved for the master user.
1
Arm Only
Can only arm the system. Cannot disarm or do other functions
2
Guest
Can arm the system and bypass zones, but cannot disarm the system
unless
the
system was armed with this code. This code is typically assigned to someone (e.g.,
babysitter or cleaner) who has a need to arm/disarm the system only at certain times.
3
Duress Code
Intended for use when you are forced to disarm or arm the system under threat. When
used, the system will act normally, but can silently notify the Central Monitoring Station
of your situation, if that service has been provided.
To Change a User's Code
Changing the Master code:
Enter Current Master code +
CODE
key [8] + 01 + 4-digit new code + 4-digit new code again.
Changing a User code:
Enter Master code +
CODE
key [8] + 2-two digit user no. + 4-digit new user’s code.
To Delete a User
Enter Master code +
CODE
key [8] + 2-digit user code to be d # + 0. A single confirmation tone will
be heard and the code is no longer functional.