Chapter 4 Wall Mounting
16
RC8326 Wireless Indoor Day/Night HD Camera Installation Guide
6.
Remove the cable organizer from the stand. Insert the cables into the
hole, run cables through the organizer, and then replace it on the stand.
7.
Connect the power cable into the back of the camera and plug the
adapter end into a power outlet.
CAUTION:
Use only the power adapter provided. Using a
different one can result in hardware damage.
Figure 8: Routing the Cable
8.
Screw/attach the camera onto the camera stand.
Figure 9: Attaching the Camera
9.
Adjust the camera to a desired position and secure it firmly.
10.
Verify that the camera is active on the wireless network and is
recognized by ADT Pulse.
Note:
If the camera does not re-connect, use of the ADT Wi-Fi extender (part no.
WN3000RPH-2ADPAS) may be recommended to improve wireless connectivity.
