ITC8113 / TabX®
32
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Querying the battery state / changing the battery
The device batteries
can be removed using a mechanical ejector located on the rear side of
the device. To do this, press the respective key.
The charge state can be queried via the "
Test Power
" button on the battery. The charge state
indicator illuminates for a few seconds and displays the current charge state on a scale from 0
to 100.
LED
State of charge
Red LED blinks
0 … 10%
Red LED on
11 … 32%
Red and orange LEDs on
33 … 65%
Red, yellow and orange LEDs on
66 … 94%
All the LEDs on
95 … 100%
Recommendation for use:
If the device is in operation, the battery state can be queried via the
operating system.
