ADS PYRO 1394, Руководство по установке

Страница: 8 / 23

WINDOWS XP AND WINDOWS 2000 HARD DISK DRIVE INSTALLATION NOTES:
READ THIS AFTER YOU HAVE INSTALLED YOUR HARD DRIVE INTO THE DRIVE KIT.
AFTER YOU PLUG THE DRIVE KIT INTO YOUR COMPUTER AND YOUR HARD DRIVE DOES NOT
SHOW UP AS A DRIVE LETTER IN MY COMPUTER, YOU WOULD NEED TO DO THE FOLLOWING:
• RIGHT CLICK ON "MY COMPUTER", CLICK ON "MANAGE"
• CLICK ON "DISK MANAGEMENT" AND THIS WILL SHOW ALL THE DRIVES IN YOUR SYSTEM.
• IF PROMPTED TO INITIALIZE YOUR DRIVE, GO AHEAD AND DO SO. (FOR
NEW HARD
DRIVES ONLY, FOR HARD DRIVES WITH DATA IN THEM, INITIALIZING IT ERASES THE
DATA ON THAT DRIVE.)
YOU WILL NOW SEE THE FIREWIRE OR USB2.0 DRIVE IN THE LIST OF DRIVES IN THE LOWER
RIGHT SIDE OF THE WINDOW. YOU MAY GO AHEAD AND RIGHT CLICK ON THE DRIVE AND
MAKE A NEW PARTITION. THIS WILL RUN A WIZARD THAT ALLOWS YOU TO PARTITION THE
DRIVE, FORMAT IT AND ASSIGN IT A DRIVE LETTER.
WINDOWS 98SE AND WIN ME HARD DISK DRIVE INSTALLATION NOTES:
READ THIS AFTER YOU HAVE INSTALLED YOUR HARD DRIVE INTO THE DRIVE KIT. AFTER YOU
PLUG THE DRIVE KIT INTO YOUR COMPUTER AND YOUR HARD DRIVE DOES NOT SHOW UP
AS A DRIVE LETTER IN MY COMPUTER, YOU WOULD NEED TO DO THE FOLLOWING:
• RIGHT CLICK ON "MY COMPUTER", THEN CLICK ON "PROPERTIES"
• CLICK ON "DEVICE MANAGER"
• CLICK ON "DISK DRIVES"
• DOUBLE CLICK ON THE DRIVE THAT YOU JUST PLUGGED IN (FOR EXAMPLE: IF YOU
PLUGGED IN MAXTOR YOU SHOULD CLICK ON THE MAXTOR)
• CLICK ON THE "SETTINGS" TAB
• CHECK THE REMOVABLE BOX
• ASSIGN A DRIVE LETTER (MAKE SURE YOU ASSIGN A DRIVE LETTER THAT IS NOT IN USE,
THE START AND ENDING DRIVE LETTER SHOULD BE THE SAME LETTER ALSO. SO IF YOU
TYPED IN DRIVE M, AS THE STARTING DRIVE LETTER, IT SHOULD ALSO BE THE ENDING
DRIVE LETTER)
• CLICK "OK" THEN RESTART THE COMPUTER
• AFTER RESTART, OPEN UP "MY COMPUTER", THIS WILL SHOW THE DRIVE LETTER THAT
YOU JUST ASSIGNED TO THE FIREWIRE OR USB 2.0 DRIVE KIT. IF THIS IS A NEW DRIVE,
YOU CAN DOUBLE CLICK THE DRIVE TO FORMAT IT.
FDISK:
FDISK IS A DOS APPLICATION THAT WILL ALLOW YOU TO PARTITION NEW HARD DRIVES IN
THE COMPUTER (I.E.: DRIVE KIT W/ HARD DRIVE). YOU MUST USE FDISK IF YOU PLAN TO
UPGRADE THE OS IN YOUR COMPUTER OR PLAN TO MOVE THE DRIVE KIT TO DIFFERENT
COMPUTERS FROM TIME TO TIME. FDISK IS REALLY HARD TO USE AND ONLY INTENDED
FOR ADVANCED USERS. IT CAN BE ACCESSED FROM THE DOS PROMPT BY TYPING FDISK.
FOR MORE HELP ON FDISK, CHECK OUT THE MICROSOFT WEBSITE AND SEARCH FOR HELP
ON FDISK.
Drive Kit Installation Manual 8
Drive Kit Installation Manual 9