ADS PYRO 1394, Руководство по установке

Страница: 5 / 23

STEP 4:
For Hard Drive installation, connect
the LED activity light cable from the
front of the Drive Kit to its connector
located towards the back of the
drive kit. Gently place the hard drive
on top of the black cable between
the rails that we have in the bottom
of the drive kit. For Optical Drive
Installations, pop out the front bezel
and slide your drive in.
Connect the power supply cable
from the drive kit into the hard drive
or optical drive you are installing.
STEP 5:
Connect the flat ribbon cable to the
drive.
NOTE: The red line on the ribbon
must be facing toward the power
connector of the drive and for the
end connected to the drive kit, the
red line must be on the side closest
to the outside casing of the drive kit.
STEP 6:
With the provided screws, mount the hard drive or cd-rom in place. For a
hard drive this would be done from the bottom of the Drive kit. For
CD-ROM’s, you need to secure it with the supplied screws from the sides of
the drive kit.
Drive Kit Installation Manual 4
Drive Kit Installation Manual 5