- 7 -
Hardware Guide
Front Panel
Power Button
Use the Power button in the front panel to start your NAS Drive Kit. Make
sure you follow the instructions on installing the Hard Disk, connecting to an
appropriate Power Outlet and connecting to your network before anything
else.
When you press the Power button, the LED in the front panel will start
blinking. See the table below to understand the meaning of the LED.
To power off, press and hold the Power button for two seconds until Power
LED starts to blink.
LEDs Definition
LED
Status
Meaning
Blinking
Boot Up or Shut Down
POWER
Solid Green
Unit is ON
Off
Ethernet cable not connected
Solid Green
Ethernet cable connected
LAN
Blinking
Ethernet Data transferring
HD Amber/Blinking
HD
activity
Rear Panel
