Adria Motorhome 2012, Руководство пользователя

Страница: 65 / 187

D D
Sleeping arrangements
9
Adria Motorhomes 65
9.3.2 Converting the seating group into a bed in the driving direction
For vehicles with full dinette, the seating group can be converted into a bed in the driving direc-
tion:
Converting to a bed:
Depending on the vehicle equipment, unlock the bench extensions and pull the exten-
sions out to the side.
Lower the table (Chapter 9.3.1).
Depending on the vehicle equipment, insert the additional board near the wall between
the seat benches.
Push the seat cushions together and turn the backrest cushions over.
There is a small gap between the cushions depending on the model. Fill the gap with an
extra cushion.
Re-conversion:
Reconvert the seating group in reverse sequence.
9.3.3 Converting the seating group into a bed crosswise to the driv-
ing direction
On vehicles with a side seat on the passenger's side, the seating group can be converted into
a single or double bed crosswise to the driving direction.
Converting the seat box on the passenger's side:
Unlock the seat box.
– The latch (Fig. 47/4) is located at the front of the seat box and must be turned by 90°.
Then pull out the seat box (Fig. 47/1) to the stop.
Unlock the table support (Fig. 47/2) and swivel the support by 90° into the corridor.
Fig. 47 Pulling out the seat box
1 Seat box
2 Support for table
3 Table
4 Latch
1 2 3
4