Adria Motorhome 2012, Руководство пользователя

Страница: 108 / 187

D D
Heater & hot water
13
108 Adria Motorhomes
13.4.1 Electrical floor heating
The electrical floor heating can only be used when the vehicle is connected to a 230 V supply.
For your safety, a transformer reduces the mains voltage to a low voltage which is then fed to
the heating foils.
The transformer (Fig. 77/3) for the electrical floor heating is fitted in either a bed box or in the
garage depending on the model.
Using the electrical floor heating:
Check the circuit protection for the 230V power supply at the camping site is
adequate.(350 W - 1.5 A)
Check the connection cable is wound off fully from the cable reel.
Check the 230 V circuit breaker in the vehicle is switched on.
Check the mains plug of the transformer is connected to a 230 V socket.
Turn the rotary switch clockwise to the desired heating level to switch the floor heating
on.
Select one of the heating levels (20 V, 22 V, 24 V) to set the heater performance.
Turn the rotary switch anticlockwise to "0" to switch the floor heating off.
The electrical floor heating has an overload protection. The overload protection triggers when
the transformer is overloaded. The pin (Fig. 77/1) springs out.
When the transformer has cooled down, push the pin (Fig. 77/1) on the overload protec-
tion back in again.
Danger!
Risk of electric shock or short-circuit
Do not drill any holes or screw in any screws in the floor when the vehicle is fitted with
electrical floor heating.
Danger!
Risk of overheating
Do not cover the transformer.
Fig. 77 "Electrical floor heating" transformer
1 Overload protection pin
2 Rotary switch
3 Transformer
10100091
2
1
3