Adria Motorhome 2012, Руководство пользователя

Страница: 141 / 187

D D
Cleaning & care
19
Adria Motorhomes 141
19.1.2 Cleaning plastic parts
Clean plastic parts only with warm water, mild household cleanser and a soft, clean
sponge or cloth. The aqueous solution should contain 2% cleaning agent at the most.
Do not use scouring agents. They would scratch the plastic surfaces.
Very greasy or oily spots can be washed with ethyl, isopropyl or isobutyl alcohol.
Organic solvents (e.g. acetone, methanol or ethanol) could damage the material.
An example of possible damage to moulded plastic parts are stress cracks caused by
different media. Other chemicals can have a swelling and softening effect on the plastic
material. Therefore, plastic parts should be subjected to contact with the solvents
referred to above only for a short period (2 minutes max.) at room temperature.
Avoid mechanical loads (e.g. clamping, twisting) of the plastic parts during cleaning in
order to prevent distortion.
19.2 Cleaning and care - interior
19.2.1 Cleaning plastic parts
Clean plastic parts only with warm water, mild household cleanser and a soft, clean
sponge or cloth. The aqueous solution should contain 2% cleaning agent at the most.
Do not use scouring agents. They would scratch the plastic surfaces.
Very greasy or oily spots can be washed with ethyl, isopropyl or isobutyl alcohol.
Organic solvents (e.g. acetone, methanol or ethanol) could damage the material.
An example of possible damage to moulded plastic parts are stress cracks caused by
different media. Other chemicals can have a swelling and softening effect on the plastic
material. Therefore, plastic parts should be subjected to contact with the solvents
referred to above only for a short period (2 minutes max.) at room temperature.
Avoid mechanical loads (e.g. clamping, twisting) of the plastic parts during cleaning in
order to prevent distortion.
To prevent calcification, the water used must be softened. When calcification of the sur-
face occurred, it can be removed with a diluted acid solution (e.g. acetic acid).
Important!
Exposure to sunlight can cause the plastic parts to yellow. This is not a quality defect.
Important!
• Use only commercially available, mild cleaning agent to clean the vehicle. Ask your
ADRIA dealer for advice.
• Do not use caustic or abrasive cleaning agent.
• Avoid everything that could cause scratching or scoring.
Warning!
Risk of injuries through caustic substances
Do not get acids into the eyes or on mucous membranes! Avoid skin contact!
To remove calcification, use only highly diluted, commercially available acids (e.g. ace-
tic acid).