Advanced RF Technologies, Inc.
26
6.
MAINTENANCE GUIDE FOR PSR-78-8527 REPEATER
6.1
Periodic Inspection Checklist
1.
Repeater
a.
Log into the ADRF unit and check for any alarms in the system
b.
Address any outstanding alarms
c.
Check for loose connections to the repeaters/remotes and antennas. If connections are loose,
make sure that all connections are tightly fastened.
d.
Check that cables and connectors are in good condition.
e.
Ensure that the repeater/remote brackets are in good condition and that the repeater/remote is
securely fastened.
f.
Verify that the repeater has 3” of clearance on all sides to ensure proper ventilation.
6.2
Preventive Measures for Optimal Operation
6.2.1
Recommendations
Perform the
Periodic Inspection Checklist
on a semi-annually basis.
6.2.2
Precautions
Do not operate the repeater with the antennas in extremely close proximity to one another as this may
cause damage to the repeater.
Do not change the parameters unless instructed to do so by an authorized supervisor.
Do not move the repeater unless instructed to do so by an authorized supervisor.
Do not detach any cables to the repeater unless repair of respective components is necessary.
7.
WARRANTY AND REPAIR POLICY
7.1
General Warranty
The PSR-78-8527 carries a Standard Warranty period of two years unless indicated otherwise on the package or
in the acknowledgment of the purchase order.
7.2
Limitations of Warranty
Your exclusive remedy for any defective product is limited to the repair or replacement of the defective product.
Advanced RF Technologies, Inc. may elect which remedy or combination of remedies to provide in its sole
discretion. Advanced RF Technologies, Inc. shall have a reasonable time after determining that a defective
product exists to repair or replace the problem unit. Advanced RF Technologies, Inc. warranty applies to repaired
or replaced products for the balance of the applicable period of the original warranty or ninety days from the
date of shipment of a repaired or replaced product, whichever is longer.
7.3
Limitation of Damages
The liability for any defective product shall in no event exceed the purchase price for the defective product.
7.4
No Consequential Damages
Advanced RF Technologies, Inc. has no liability for general, consequential, incidental or special damages.
7.5
Additional Limitation on Warranty
Advanced RF Technologies, Inc. standard warranty does not cover products which have been received
improperly packaged, altered, or physically damaged. For example, broken warranty seal, labels exhibiting
tampering, physically abused enclosure, broken pins on connectors, any modifications made without Advanced
RF Technologies, Inc. authorization, will void all warranty.
