Duo-i6515/6525/8030NM
User Manual V1.6
Advanced RF Technologies, Inc. Proprietary Document
Page 14 of 40
2.3
Installation
2.3.1
Tools
No special tools or equipment are needed to install the Duo-
i6515/6525/8030NM.
2.3.2
Procedure
Four (for Duo-i6515/6525NM) or six (for Duo-i8030NM) mounting holes are
provided on the wall-mounting bracket to attach it to the wall. The wall
bracket must be securely attached to sufficiently carry the weight of the Duo-
i6515/6525/8030NM, which is bolted to the wall bracket through four or six
aligned mounting holes.
The following steps should be followed while mounting the repeater:
Installation Procedure (Wall Mount)
①
Take the Duo-i6515/6525/8030NM out of the box
②
Using the four or six anchor bolts, mount the bracket on the wall
③
Make sure the bracket is securely mounted
④
Slightly tilt the repeater and mount the repeater onto the wall as shown in
the picture. Hook the upper 2 guard screws first and then slide/push in
the lower 2 guard screws into the place.
⑤
Make sure the Duo-i6515/6525/8030NM is securely placed onto the wall
bracket
⑥
Fasten the 8 bracket screws back properly
⑦
Inspect that everything is secure
* Rack Mount option is also available. Please contact ADRF for additional
information.
