ADLINK Technology STC2-10WP-AL Скачать руководство пользователя страница 57

Страница: 57 / 121

STC2-AL/KL Series

4.4.21 Advanced > Trusted Computing > TPM 1.2 Configu

ration

Feature

Options

Description

Configuration

Info only

Security Device

Support

Disable

Enable

Enables or Disables BIOS support for

security device. OS will not show Security

Device. TCG EFI protocol and INT1A

interface will not be available.

TPM State

Disabled

Enabled

Enable/Disable Security Device. NOTE:

Your Computer will reboot during restart in

order to change State of the Device.

Pending operation

None

TPM Clear

Schedule an Operation for the Security

Device. NOTE: Your Computer will reboot

during restart in order to change State of

Security Device.

Security Device

Support*

Disable

Enable

Enables or Disables BIOS support for

security device. OS will not show Security

Device. TCG EFI protocol and INT1A

interface will not be available.

TCM State

Disabled

Enabled

Enable/Disable Security Device. NOTE:

Your Computer will reboot during restart in

order to change State of the Device.

Pending operation*

None

TPM Clear

Schedule an Operation for the Security

Device. NOTE: Your Computer will reboot

during restart in order to change State of

Security Device.

Device Select

TPM 1.2

TPM 2.0

Auto

TPM 1.2 restricts support to TPM 1.2

devices, TPM 2.0 restricts support to TPM

2.0 devices, Auto supports both with the

default set to TPM 2.0 devices if not found,

TPM 1.2 devices will be enumerated

Current Status Information
TPM Enabled Status: N/A, reset required
TPM Active Status:

N/A, reset required

TPM Owner Status: N/A, reset required
TCM Enabled Status: N/A, reset required
TCM Active Status:

N/A, reset required

Содержание STC2-10WP-AL


























































































































Результаты поиска

Содержание STC2-10WP-AL

Отзывы:

ADLINK Technology STC2-10WP-AL, Руководство пользователя, Страница: 57 / 121

Результаты поиска

Содержание STC2-10WP-AL

Отзывы: