ADLINK Technology STC2-10WP-AL Скачать руководство пользователя страница 115

Страница: 115 / 121

Important Safety Instructions

105

STC2-AL/KL Series

Important Safety Instructions

For user safety, please read and follow all instructions, Warnings,

Cautions, and Notes marked in this manual and on the associated

device before handling/operating the device, to avoid injury or

damage.



Read these safety instructions carefully.



Keep the User’s Manual for future reference.



Read the Specifications section of this manual for detailed

information on the recommended operating environment.



It is recommended that the device be installed in Information

Technology Rooms that are in accordance with Article 645 of

the National Electrical Code and NFPA 75.



When installing/mounting or uninstalling/removing device is

required:



Turn off power and unplug any power cords/cables.



Reinstall all chassis covers before restoring power.



To avoid electrical shock and/or damage to device:



Keep device away from water or liquid sources.



Keep device away from high heat or humidity.



Keep device properly ventilated (do not block or cover

ventilation openings).



Always use recommended voltage and power source set

tings.



Always install and operate device near an easily accessi

ble electrical outlet.



Secure the power cord (do not place any object on/over

the power cord).



Only install/attach and operate device on stable surfaces

and/or recommended mountings.



The device is powered by an adapter or DC source.

Ensure that the adapter or DC source is properly

grounded.



If the device will not be used for long periods of time, turn off

and unplug from its power source.



Never attempt to repair the device, which should only be ser

viced by qualified technical personnel using suitable tools.

Содержание STC2-10WP-AL


























































































































Результаты поиска

Содержание STC2-10WP-AL

Отзывы:

ADLINK Technology STC2-10WP-AL, Руководство пользователя, Страница: 115 / 121

Результаты поиска

Содержание STC2-10WP-AL

Отзывы: