ADLINK Technology ROScube-X RQX-58 Series, Руководство пользователя

Страница: 43 / 55

Getting Started 33
RQX-58x Series
4 Getting Started
This chapter describes the steps needed to begin using the RQX-
58x Series in your application.
4.1 Attach DC Power Connector
Locate the DC power cable shown below that is included in the
Accessory Box. Insert connector P2 into the ATX DC Power Input
“F” shown in
Figure 3-1
on page 17.
Connect a DC power source as described in
Section 3.1.9: DC
Power Input on page 23
to the inputs of connector P1, connect-
ing “positive” (red) to Pin1 and “negative” (black) to Pin 2.
WARNING:
Before providing DC power, ensure the voltage and polarity pro-
vided are compatible with the DC input. Improper input voltage
and/or polarity can be responsible for system damage.
AVERTISSEMENT: Avant de connecter à une source de courant
continu, veuillez vous assurer de la polarité de la tension confor-
mément à l'entrée CC du PC. Une tension et/ou une polarité
incorrectes peuvent causer des dommages irréversibles sur le
système.