42
Interfaces
3.53 DP Enable Switch (SW12)
Table 3-54 lists the pin signals of the DP Enable dip switch, which provides 4 poles, 8 positions
with 1.27mm pitch.
NOTE: Setup for normal mode - 1=OFF, 2=OFF, 3=ON, 4=ON; Refer to the PI3EQXDP1201
Display Port Redriver datasheet for more details.
3.54 eDP0 Enable Switch (SW14)
Table 3-55 lists the pin signals of the eDP0 Enable dip switch, which provides 4 poles, 8 posi-
tions with 1.27mm pitch.
NOTE: Setup for normal mode - 1=OFF, 2=OFF, 3=ON, 4=ON; Refer to the PI3EQXDP1201
DisplayPort Redriver datasheet for more details.
3.55 eDP0 Operation Switch (SW15)
Table 3-56 lists the pin signals of the eDP0 Operation dip switch, which provides 4 poles, 8 posi-
tions with 1.27mm pitch.
NOTE: Setup for normal mode - 1=ON, 2=ON, 3=OFF, 4=OFF; Refer to the PI3EQXDP1201
DisplayPort Redriver datasheet for more details.
Table 3-54: DP Enable Switch (SW12)
Pin #
Signal
Pin#
Signal
1 (off)
DP_ENABLE [
Default
]
8 (on)
GND
2 (off)
DP_AUTOEQ [
Default
]
7 (on)
GND
3 (off)
DP_OC_0 [
Default
]
6 (on)
GND
4 (off)
DP_OC_1 [
Default
]
5 (on)
GND
Table 3-55: eDP0 Enable Switch (SW14)
Pin #
Signal
Pin#
Signal
1 (off)
eDP0_ENABLE [
Default
]
8 (on)
GND
2 (off)
eDP0_AUTOEQ [
Default
]
7 (on)
GND
3 (off)
eDP0_OC_0 [
Default
]
6 (on)
GND
4 (off)
eDP0_OC_1 [
Default
]
5 (on)
GND
Table 3-56: eDP0 Operation Switch (SW15)
Pin #
Signal
Pin#
Signal
1 (off)
eDP0_OP_0 [
Default
]
8 (on)
GND
2 (off)
eDP0_OP_1 [
Default
]
7 (on)
GND
3 (off)
Not Connected [
Default
]
6 (on)
Not Connected
4 (off)
Not Connected [
Default
]
5 (on)
Not Connected