ADLINK Technology PXIS-2680P, Руководство пользователя

Страница: 20 / 50

12 Getting Started
Peripheral Module Installation
1. Smoothly slide the peripheral module into an available
peripheral slot. Make sure that the peripheral module is
aimed toward the rails. Never force the peripheral mod-
ule into the slot.
2. Push the handle until it clips in place. You will hear a
click sound when the handle has been pulled up.
3. Insert the mounting screws and screw tightly.
4. When taking out the peripheral module, unscrew the
mounting screws and push the switch out.
Power Supply Unit Replacement Procedures
There are two 1U redundant power supplies with full range auto-
sensing, auto selection, and 300W output. If one power supply has
a problem, the other will take over. An alarm will beep to remind
you to change the defective power supply.
Figure 2-5: Redundant Power Supply (Front & Rear)