ADLINK Technology PCI-8213, Руководство пользователя

Страница: 10 / 40

2
•
Introduction
100Base-T4 Fast Ethernet can utilize existing Category 5 cabling, but
doesn’t provide full duplex operation. Full duplex 100Base-TX operation
allows simultaneous transmission and reception, both at 100Mbps, thus
providing service potentially equal to 200Mbps half-duplex service.
1.1.2 Connect the Network Cable
Category 5 UTP cable qualifies for both, the Fast Ethernet and Ethernet,
cabling rules. The maximum length of any single cable run between any
station and its supporting Hub is 100 meters. The maximum length of a
cable joining two Hubs is 10m in general, but is 100m when both Hubs
qualify as Ethernet class 2 Repeaters. However, these cables run may
need to be shorter than the given individual maxim um lengths because
their maximum aggregated cable run between any two stations is 205m.
Connecting for 100Mbps Ethernet
Category 5 UTP cable is required for fast Ethernet operation. The
maximum cable run between the PCI-8213/8214 and the supporting
Hub is 100 meters. The cable must be straight (not a crossover cable)
with an RJ-45 plug at each end. Make the network connection by
plugging one end of the cable into the RJ-45 jack of the PCI-8213/8214,
and the other end into a port of the supporting Hub.
Connecting for 10Mbps Ethernet
Category 3, Category 4, and Category 5 UTP cable, as well as EIA/TIA-
568 100-0hm STP cable, all qualify under Ethernet cabling rules. The
maximum cable run between the PCI-8213/8214 and the supporting
Hub is 100 meters. The cable must be straight (not a crossover cable)
with RJ-45 connector at each end. To connect the network is via
plugging one end of the cable into the RJ-45 jack of the PCI-8213/8214
and the other end into a port of the supporting Hub.
1.1.3 Pin-definition of RJ45 Connector
This connector is for the 10/100Mbps Ethernet capability of the Ethernet
card. The figure below shows the pin out assignments of this connector
and its corresponding input jack.
8
7
6
5
4
3
2
1
RJ45
Pin#1: TD+ Pin#5: NC
Pin#2: TD- Pin#6: RD-
Pin#3: RD+ Pin#7: NC
Pin#4: NC Pin#8: NC