ADLINK Technology NuPRO-865 Скачать руководство пользователя

Страница: 55 / 63

Award BIOS Setup

•

Min. Power Saving:

Minimum power management. Doze Mode = 1 hr. Standby Mode = 1 hr., Suspend

Mode = 1 hr., and HDD Power Down = 15 min.

Max. Power Saving:

Maximum power management –

only available on SL CPU’s

. Doze Mode = 1 min.,

Standby Mode = 1 min., Suspend Mode = 1 min., and HDD Power Down = 1 min.

User Defined:

Allows the user to set each mode individually. When not disabled, each of the range is

from 1 min. to 1 hr. except for HDD Power Down, which ranges from 1 min. to 15 min.

and disable.

Video Off Method:

This determines the manner in which the monitor is blanked.

V/H SYNC+Blank:

By selecting this, the system will turn off the vertical and horizontal synchronization ports

and write blanks to the video buffer.

Blank Screen:

This option only writes blanks to the video buffer.

DPMS:

Initial display power management signaling.

Video Off Method:

This item allows the user to use the on/off Method function.

Options: Yes, No.

Video Off In Suspend:

This determines the manner in which the monitor is blanked.

Options: Yes, No.

Suspend Type:

Select the Suspend Type.

Options: PwrOn Suspend, Stop Grant.

MODEM Use IRQ:

This determines the IRQ in which the MODEM can use.

Options: 3, 4, 5, 7, 9, 10, 11, and NA.

Содержание NuPRO-865
































































Результаты поиска

Содержание NuPRO-865

Отзывы:

Похожие инструкции для NuPRO-865

Бренды по названию

Популярные бренды

ADLINK Technology NuPRO-865, Руководство пользователя

Результаты поиска

Содержание NuPRO-865

Отзывы:

Похожие инструкции для NuPRO-865

Бренды по названию

Популярные бренды