ADLINK Technology NuPRO-865 Скачать руководство пользователя

Страница: 36 / 63

•

Award BIOS Setup

Esc: Quit

↑

↓

→←

: Select Item

F10: Save & Exit Setup

Time, Date, Hard Disk Type….

Note: A brief description of each highlighted selection appears at the bottom of

the screen.

Setup Items:

The main menu includes the following main setup categories. Recall that some
systems may not include all entries.

Standard CMOS Features:

Use this menu for basic system configuration. Please refer to section 3.3 for
further information.

Advanced BIOS Features:

Use this menu to set the Advanced Features available on the system. Please
refer to section 3.5 for further information.

Advanced Chipset Features:

Use this menu to change the values in the chipset registers and to optimize the
system's performance. Please refer to section 3.6 for further information.

Integrated Peripherals:

Use this menu to specify the settings for integrated peripherals. Please refer to
section 3.7 for further information.

Power Management Setup:

Use this menu to specify the settings for power management. Please refer to
section 3.8 for further information.

PnP / PCI Configuration:

This entry appears if the user’s system supports PnP / PCI. Please refer to
section 3.9 for further information.

PC Health Status:

Use this menu to view the system temperature, speed and voltage status. Please
refer to section 3.10 for further information.

Frequency / Voltage Control:

Use this menu to specify the settings for frequency/voltage control. Please refer
to section 3.1 for further information.

Содержание NuPRO-865
































































Результаты поиска

Содержание NuPRO-865

Отзывы:

Похожие инструкции для NuPRO-865

Бренды по названию

Популярные бренды

ADLINK Technology NuPRO-865, Руководство пользователя

Результаты поиска

Содержание NuPRO-865

Отзывы:

Похожие инструкции для NuPRO-865

Бренды по названию

Популярные бренды