manualshive.com logo in svg

ADLINK Technology NuPRO-861, Руководство пользователя

Поделиться
Скачать
ADLINK Technology NuPRO-861 Скачать руководство пользователя страница 55

Award BIOS Setup 

•

 49 

 

 

UART Mode Select: 

This item allows the user to select UART mode.  
 

Options: IrDA, ASKIR, and Normal. 

 

RxD, TxD Active: 

This item allows the user to determine the active of RxD, TxD. 
 

Options: “Hi, Hi”, “Lo, Lo”, “Lo, Hi” and “Hi, Lo”. 

 

IR Transmission delay: 

This item allows the user to enable/disable IR transmission delay. 
 

Options: Enabled, Disabled. 

 

UR2 Duplex Mode: 

This item allows the user to select the IR half/full duplex function. 
 

Options: Half, Full. 

 

Use IR Pins: 

This item allows the user to select IR transmission routes, one is RxD2m, TxD2 
(COM Port) and the other is IR-Rx2Tx2. 
 

Options: IR-Rx2Tx2, RxD2, and TxD2. 

 
Onboard Parallel Port: 

This item allows the user to determine access onboard parallel port controller 
with a particular I/O address. 
 

Options: 3BC/IRQ7, 378/IRQ7, 278/IRQ5, and Disabled. 

 

Parallel Port Mode: 

Select an operating mode for the onboard parallel (printer) port. Select Normal, 
Compatible, or SPP unless it is certain that the hardware and software the user 
uses both support one of the other available modes. 
 

Options: SPP, EPP, ECP and ECP+EPP. 

 

EPP Mode Select: 

Select EPP port type 1.7 or 1.9. 
 

Options:  EPP1.7, 1.9. 

 

ECP Mode Use DMA: 

Select a DMA channel for the parallel port for use during ECP mode. 
 

Options: 3, 1. 

Содержание NuPRO-861




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды