ADLINK Technology NuPRO-861, Руководство пользователя

Страница: 17 / 67

Installation
•
11
Memory Module Installation
Figure 5 illustrates the notch marks and what they should look like on the DIMM
memory module.
DIMMs have 184-pins and two notches matching the onboard DIMM socket.
DIMM modules are installed by placing the chip firmly into the socket at a
90-degree angle and pressing straight down (figure 6) until it fits tightly into the
DIMM socket.
Figure 5: DIMM Memory and 184-pins Socket
Figure 6: Memory Installation
Carefully follow the steps below to install the DIMMs:
1. To avoid generating static electricity and damaging the DIMM, ground
yourself by touching a grounded metal surface or using a ground scrap
before touching the DIMM.
2. Do not touch the connector of the DIMM. Dirt residues may cause
malfunctions.
3. Hold the DIMM with its notch to the front side of the NuPRO-861 Series and
insert it completely into the socket. A DIMM should be inserted into the inner
socket first. Guide the hole on each end of the DIMM over the retaining post
at each end of the DIMM socket.
4. If installing two DIMMs, install the second DIMM using the same procedure
as above.
5. Do not forcefully insert the DIMM if it does not go in smoothly. Remove the
DIMM completely and try again.