ADLINK Technology NuPRO-710 Series Скачать руководство пользователя страница 55

Страница: 55 / 67

BIOS Setup

•

On-Chip Primary/Secondary PCI IDE

The integrated peripheral controller contains an IDE interface with support
for two IDE channels. Select Enabled to activate each channel separately.

USB Keyboard support

Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.

The Choice: Enabled, Disabled.

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. Even when so equipped, if you add
a higher performance controller, you will need to disable this feature.

Choices: Enabled, Disabled.

Onboard Serial Port 1/Port 2

This item allows you to determine access onboard serial port 1/port 2
controller with which I/O address.

The Choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

Onboard UART1/UART2

This item allows you to determine access onboard serial port 1/port2
controller with which I/O address.

Choices are 3F8/IRQ4, 238/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled.

UART 2 Mode

This item allows you to determine which InfraRed (IR) function of onboard
I/O chip.

Choices are Standard, ASKIR, HPSIR.

RxD, TxD Active

This item allows you to determine the active of RxD, TxD.

The Choice: “Hi, Hi”, “Lo, Lo”, “Lo, Hi”, “Hi, Lo”.

Onboard Parallel Port

This item allows you to determine access onboard parallel port controller
with which I/O addresses.

Choices are 378/IRQ7, 278/IRQ5, 3BCH/IRQ7, Disabled.

Содержание NuPRO-710 Series




































































Результаты поиска

Содержание NuPRO-710 Series

Отзывы:

Похожие инструкции для NuPRO-710 Series

Бренды по названию

Популярные бренды

ADLINK Technology NuPRO-710 Series, Руководство пользователя

Результаты поиска

Содержание NuPRO-710 Series

Отзывы:

Похожие инструкции для NuPRO-710 Series

Бренды по названию

Популярные бренды