ADLINK Technology NuPRO-710 Series, Руководство пользователя

Страница: 51 / 67

BIOS Setup
•
43
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware (e.g.,
Windows 95).
The Choice: Yes and No.
Resource Controlled by
The Award Plug and Play BIOS can automatically configure all the boot and
Plug and Play-compatible devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields disappear, as the BIOS automatically
assigns them.
Choices are Auto and Manual (default).
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have installed
a new add-on and the system reconfiguration has caused such a serious
conflict that the operating system cannot boot.
Choices are Enabled and Disabled (default).
IRQ n Assigned to
When resources are controlled manually, assign each system interrupt as
one of the following types, depending on the type of device using the
interrupt:
Legacy ISA Devices compliant with the original PC AT bus specification,
requiring a specific interrupt (such as IRQ4 for serial port 1).
PCI/ISA PnP Devices compliant with the Plug and Play standard, whether
designed for PCI or ISA bus architecture.
DMA n Assigned to
When resources are controlled manually, assign each DMA channel as one
of the following types, depending on the type of device using the interrupt:
Legacy ISA Devices compliant with the original PC AT bus specification,
requiring a specific DMA channel.
PCI/ISA PnP Devices compliant with the Plug and Play standard, whether
designed for PCI or ISA bus architecture.
Used MEM base addr
Select a base address for the memory area used by any peripheral that
requires high memory.
The Choice: C800, CC00, D000, D400, D800, DC00, N/A.