ADLINK Technology NuPRO-710 Series, Руководство пользователя

Страница: 10 / 67

2
•
Introduction
l
IrDA Connector: Supports an infrared port module for wireless
interface.
l
ATI Rage Pro XL Graphics Controllers (only for NUPRO-710):
On-board 64-bit graphics accelerator with support for Digital Flat panel
monitors and superior support for 3D and motion video, with 8MB
SGRAM.
l
Desktop Management Interface (DMI): Supports DMI through BIOS that
allows hardware to communicate within a standard protocol creating a
higher level of compatibility.
l
Versatile SDRAM Memory Support: Is equipped with three DIMM
sockets to support (8MB, 16MB, 32MB, 64MB, 128MB, 256MB)
SDRAM/EDO 168-pin memory module.
l
Super Multi-I/O (Winbond 83977TF_AW Chipset): Provides two
high-speed UAR T compatible serial ports and one parallel port with
EPP and ECP capabilities. UART2 can also be directed from COM2 to
the Infrared Module for wireless connections. Two floppy drives of
either 5.25" or 3.5" (1.44MB or 2.88MB) are also supported without an
external card.
l
H/W monitoring: Winbond 83781D Chipset, monitoring (+/-)Voltage,
System Temperature and fan speed.
l
Ready-to-Use Connectors: Is equipped with onboard Parallel (Printer)
Port, Serial Ports (COM1&2), PS/2 Mouse, and PS/2 Keyboard
connectors without the need for extra cables and brackets.
l
PCI Bus Master IDE Controller: Comes with an onboard PCI Bus
Master IDE controller with two connectors that supports four IDE
devices in two channels, provides faster data transfer rates, and
supports Enhanced IDE devices such as Tape Backup and CD-ROM
drives. This controller supports UltraDMA/33, PIO Modes 3 and 4 and
Bus Master IDE DMA Mode 2. BIOS now support IDE CD-ROM or SCSI
boot-up.
l
PICMG Compatible: 32 bits PCI-ISA CARD EDGE Connector supports
32-bit Bus Master 4 x PCI Expansion slots and 16-bit ISA Expansions
slots.
l
Watchdog Timer: The function can generate a system reset. Jumper
configurable to always disable or software programmable
enable/disable. The timer interval is 10-80sec.
l
Uses I/O ports hex 043 and 443 to control the watchdog timer.
l
DMA channels: 7
l
Interrupt levels: 15
l
Physical Size: 13.33" x 4.8"
l
Power Requirement: +5V/4.5AMPS.