Command Set
•
39
Note
: 1.
When you want to change the checksum or baud rate,
the DEFAULT* pin must be grounded at first.
2. Waiting a maximum of 7 seconds to perform auto
calibration and ranging after the analog input module is
reconfigured. Please don’t execute any other command
during this time period.
@Example
User command:
%0130050600<CR>
Response:
!30<CR>
Item
Meaning
Description
%
(Leading Code)
Command leading code.
01
(OldAddr)
Original address ID is 01(Hex).
30
(NewAddr)
New address ID is 30(Hex).
05
(InputRange)
Analog input range is
±
2.5V
06
(BaudRate)
Baud rate is 9600.
00
(DataFormat)
00 means data format is engineering
units, checksum is disable and
integration time is 50 ms (60Hz).
<CR>
Carriage return
0x0D.