ADLINK Technology MECS-6110, Руководство пользователя

Страница: 90 / 93

90
MECS-6110
9. This equipment is not suitable for use in locations where children are likely to be present.
10. Equipment must be serviced by authorized technicians when:
•
The power cord or plug is damaged;
•
Liquid has penetrated the equipment;
•
It has been exposed to high humidity/moisture;
•
It is not functioning or does not function according to the user’s manual;
•
It has been dropped and/or damaged; and/or,
•
It has an obvious sign of breakage.
11. Please pay strict attention to all warnings and advisories appearing on the device, to
avoid injury or damage.
12. The equipment may have more than one power supply input. To reduce the risk of
electrical shock, trained personnel should disconnect all power supply inputs before
servicing.
13. It is recommended that equipment be installed only in a server room or computer room
where access is:
•
Restricted to qualified service personnel or users familiar with restrictions applied to
the location, reasons therefor, and any precautions required;
•
Only afforded by the use of a tool or lock and key, or other means of security, and is
controlled by the authority responsible for the location.
14. Suitable for installation in Information Technology Rooms in accordance with Article 645
of the National Electrical Code and NFPA 75.
15. This product is intended to be supplied by a certified DC power source with output rating:
-36 to -72VDC, 17-9A minimum. The DC power rating current is 17-9A. All power
connection wiring must be performed by a qualified electrician in accordance with
National Electrical Code, ANSI/NFPA 70 and Canadian Electrical Code, Part I, CSA
C22.1. The DC power supply should be well-grounded to ensure safe operation. The
protective earthing conductor shall be minimum 12 AWG and having green-and-yellow
insulation. The ground wire should be installed first (before "+" and "-") and then removed.
Shock hazard!
Disconnect all power supply inputs before servicing.