manualshive.com logo in svg

ADLINK Technology M-855 Series, Руководство пользователя

Поделиться
Скачать
ADLINK Technology M-855 Series Скачать руководство пользователя страница 9

 

Introduction 

•

 3

 

 

¡

 Low profile heat sink with fan 

¡

 I/O Shield 

 
 
 
 

 
 

 
 
 

Note:

  

M-855 OEM versions with non-standard configurations may vary 
in function or contents according to request. 

CAUTION:

 

This board must be protected from static discharge and physical 

shock. Never remove any of the socketed parts except at a 
static-free workstation. Use the anti-static bag shipped with the 
product to handle the board. Wear a wrist strap grounded through 
one of the system's ESD Ground jacks while servicing system 
components.

 

 
 

1.2 Features 

•

 Intel

®

 

Pentium

®

 M / Celeron

®

 M processor  

•

 Intel

®

  ICH4 AGPset 

•

 

Support 2GB DDR266/333 SDRAM (max.) memory 

•

 

Front Side Bus Frequency: 400/533MHz 

•

 

Chipset integrated graphic & LVDS function 

•

 

Single 10/100/1000 Mbps Gigabit Ethernet using Intel

®

 82541 chip 

•

 

Software programmable watchdog timer 

•

 Hardware 

Monitoring 

•

 

AC97 Audio Lin-out pin-header 

 

 Hardware 

Monitoring 

Hardware monitoring allows the user to monitor various aspects of system operations 
and status (including the CPU temperature, voltage, and fan RPM).  

 
 

I/O Shield Connector 

The SBC is equipped with an I/O bracket. Please use the appropriate I/O shield. 

 

! 

Содержание M-855 Series
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды