manualshive.com logo in svg

ADLINK Technology M-855 Series, Руководство пользователя

Поделиться
Скачать
ADLINK Technology M-855 Series Скачать руководство пользователя страница 46

40 

•

 BIOS Setup 

Hard Disk Boot Priority: 

Press Enter and It shows Bootable add-in Card. 

 
Virus Warning:  

Allow you to choose the VIRUS Warning feature for IDE Hard Disk boot sector 
protection.  If this function is enabled and someone attempts to write data into this 
area, BIOS will show a warning message on screen and alarm beep. 
 
 Enabled---Activates 

automatically 

when the system boots up causing a  

 

warning message to appear when anything attempts to  

 

access the boot sector or hard disk partition table. 

 

Disabled---No warning message will appear when anything attempts to  

 

access the boot sector or hard disk partition table. 

 

CPU L1& L2 Cache: 

These two categories speed up memory access. However, it depends on 
CPU/chipset design. 
 

Enabled---Enable cache  

 

Disabled---Disable cache  

 
Quick Power On Self Test: 

This category speeds up Power On Self Test (POST) after you power up the 
computer. If it is set to Enable, BIOS will shorten or skip some check items during 
POST. 
 

Enabled---Enable quick POST  

 

Disabled--- Normal POST  

 
First/Second/Third Boot Device: 

The BIOS attempts to load the operating system from the devices in the sequence 
selected in these items. 
 

The choices: Floppy, LS/ZIP, Hard Disk, CDROM, LAN and Disabled. 

 

Boot Other Device: 

When enabled, the system searches all other possible locations for an operating 
system if it fails to find one in the devices specified under the first, second, and third 
boot devices. 
 

The choices: Enabled, Disabled 

 

Swap Floppy Drive: 

If the system has two floppy drives, you can swap the logical drive name 
assignments.  
 

The choices: Enabled, Disabled. 

 

Содержание M-855 Series
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды