Utilities
27
LEC-BTS
Main Menu > System Management > Runtime Statistics
Main Menu > System Management > Flags
Main Menu > System Management > Power Up
Table 4-10: Main Menu > System Management > Runtime Statistics
Feature
Options
Description
Runtime Statistics
Info only
Total Runtime
Read only
The returned value specifies the total time in
minutes the system is running in S0 state.
Current Runtime
Read only
• The returned value specifies the time in
seconds the system is running in S0 state.
• This counter is cleared when the system is
removed from the external power supply.
Power Cycles
Read only
The returned value specifies the number of
times the external power supply has been
shut down
Boot Cycles
Read only
The Bootcounter is increased after a HW- or
SW-Reset or after a successful power-up.
Boot Reason
Read only
The boot reason is the event which causes
the reboot of the system.
Table 4-11: Main Menu > System Management > Flags
Feature
Options
Description
Flags
Info only
BMC Flags
Read only
BIOS Select
Read only
Display the selection of current BIOS
ROM
ATX/AT-Mode
Read only
Display ATX/AT-Mode
Exception Code
Read only
System exception reason
Table 4-12: Main Menu >System Management > Power Up
Feature
Options
Description
Power Up
Info only
Power Up watchdog
Note: F12 disables the Power
Up Watchdog.
• Enabled
• Disabled
The Power-Up Watchdog resets the
system after a certain amount of time
after power-up.
Power-up Mode
Attention: The Power-Up
Mode only has affect, if the
module is in ATX-Mode.
• Turn on
• Remain off
• Last State
• Turn On: The machine starts
automatically when the power supply
is turned on.
• Remain Off: To start the machine the
power button has to be pressed.
• Last State: When powered on during
a power failure the system will
automatically power on when power
is restored.
