82
Function Library
4.10 EDID Functions
4.10.1 Ready Status
Purpose
These functions set or get the ready status of the EDID ROM.
Prototype
C/C++
int Hdv62_SetEdidReadyStatus (UINT Number, UINT
Status)
int Hdv62_GetEdidReadyStatus (UINT Number, UINT&
Status)
C#
int SetEdidReadyStatus (uint Number, uint Status)
int GetEdidReadyStatus (uint Number, out uint
Status)
VB.Net
SetEdidReadyStatus (ByVal Number As UInteger, ByVal
Status As UInteger) As Integer
GetEdidReadyStatus (ByVal Number As UInteger, ByRef
Status As UInteger) As Integer
Parameters
Number
The number of device. The allowed value is from 0 to 15.
Status
Indicates whether or not the EDID ROM is ready. This value
can be read by external device through DVI-I connector.
Some external devices can auto-adjusting their resolution
by reading this EDID ROM. Users can configure the content
of the EDID ROM and set it as ready state. Could be one of
the following values:
0: EDID ROM is not ready
1: EDID ROM is ready
Return Value
No error occurs if return value >= 0; if negative value, please refer
to Section 4.9 to get error information about return codes.
Содержание HDV62
