Function Library
69
4.6.8
Sensor Status
Purpose
This function obtains the status of whether the device is connect-
ing a proper sensor or not.
Prototype
C/C++
int Hdv62_GetSensorStatus (UINT Number, UINT&
Locked)
C#
int GetSensorStatus (uint Number, out uint Locked)
VB.Net
GetSensorStatus (ByVal Number as UInteger, ByRef
Locked as UInterger) As Integer
Parameters
Number
The number of device. The allowed value is from 0 to 15.
Locked
Whether the input signal is locked. It can be used as
whether a proper sensor is connected. It can be the follow-
ing values:
0: No proper signal is detected
1: A proper signal is detected
For Analog RGB and YPbPr inputs, Locked = 1 is only if the
sensor format is the one you select. For HDMI the input,
Locked = 1 if the sensor is a valid HDMI source.
Return Value
No error occurs if return value >= 0; if negative value, please refer
to Section 4.9 to get error information about return codes.
Содержание HDV62
