Function Library
45
4.4.6
Height
Purpose
These functions set or get active height of image. They can be
used to reduce vertical scan lines.
Prototype
C/C++
int Hdv62_SetHeight (UINT Number, UINT Height)
int Hdv62_GetHeight (UINT Number, UINT& Height)
C#
int SetHeight (uint Number, uint Height)
int GetHeight (uint Number, out uint Height)
VB.Net
SetHeight (ByVal Number as UInteger, ByVal Height as
UInteger) As Integer
GetHeight (ByVal Number as UInteger, ByRef Height as
UInteger) As Integer
Parameters
Number
The number of device. The allowed value is from 0 to 15.
Height
The active height of image as illustrated in Figure 4-1. The
height coupled with YOffset is the cropping parameters. The
device crops sensor image if the height is less than Sensor-
Height which is obtaineed from section 4.4.4. The following
criteria must be met:
Height <= SensorHeight
YOffset <= SensorHeight
Height is an even number.
YOffset is an even number if sensor source is interlaced.
Return Value
No error occurs if return value >= 0; if negative value, please refer
to Section 4.9 for error information about return codes.
Содержание HDV62
