Base Unit
•
17
2.2.8 Compact Flash Connector
GEME’s standard CompactFlash (CF) socket has an ATA interface that is fully
compatible with an IDE HDD and supports both type-I and type-II CF cards. The
CF socket is on the Secondary IDE port.
2.2.9 Parallel Port connector
Parallel I/O interface signals are routed to a DB25 socket on the front panel. This
port supports full IEEE-1284 capability and provides a basic printer interface that
supports EPP and ECP enhanced port modes
IRQ and Address Setting
The IRQ, I/O address range and mode are all assigned by BIOS.
The following table outlines the parallel port default settings:
Parallel Port Mode
Bass address
IRQ
SPP 378h
IRQ7
Signal Name
Pin #
Pin #
Signal Name
Line printer strobe
1
14
AutoFeed
PD0, parallel data 0
2
15
Error
PD1, parallel data 1
3
16
Initialize
PD2, parallel data 2
4
17
Select
PD3, parallel data 3
5
18
Ground
PD4, parallel data 4
6
19
Ground
PD5, parallel data 5
7
20
Ground
PD6, parallel data 6
8
21
Ground
PD7, parallel data 7
9
22
Ground
ACK, acknowledge
10
23
Ground
Busy 11
24
Ground
Paper empty
12
25
Ground
Select 13
N/A
N/A
Содержание GEME-4000 Series
