ADLINK Technology ETX-EV133, Руководство пользователя

Страница: 26 / 48

ETX-EV133 User’s Manual Page 26
IDE HDD Auto-detection Press Enter Press Enter to auto-detect the HDD on
this channel. If detection is successful,
it fills the remaining fields on this menu.
IDE Primary Master None/Auto/Manual Selecting 'manual' lets you set the
remaining fields on this screen. Se-
lects the type of fixed disk. "User
Type" will let you select the number of
cylinders, heads, etc. Note:
PRECOMP=65535 means NONE !
Capacity Auto Display disk size Disk drive capacity (Approximated).
Note that this size is usually slightly
greater than the size of a formatted
disk given by a disk checking program.
Access Mode CHS/LBA/Large/Auto Choose the access mode for this hard
disk
The following options are selectable only if the 'IDE Primary Master' item is set to 'Manual'
Cylinder Min = 0 Max = 65535 Set the number of cylinders for this
hard disk.
Head Min = 0 Max = 255 Set the number of read/write heads
Precomp Min = 0 Max = 65535 **** Warning: Setting a value of 65535
means no hard disk
Landing zone Min = 0 Max = 65535 ****
Sector Min = 0 Max = 255 Number of sectors per track
IDE Primary and Secondary Master/Slave Items
CMOS SETUP UTILITY - Copyright (C) 1984-2001 Award Software
IDE Primary Master
IDE HDD Auto-Detection Press Enter Item Help
IDE Primary Master [Auto] Menu Level
Access Mode [Auto]
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
↑ ↓ → ← ↑ ↓ → ← ↑ ↓ → ← ↑ ↓ → ← ↑ ↓ → ←
:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-SAfe Defaults F7:Optimized Defaults