ADLINK Technology cPCIS-3330 Series, Руководство пользователя

Страница: 21 / 76

Getting Started 13
Figure 2-6: Remove rear panel fastening screws;
CD-ROM drive bay blanking cover screw locations
4. Install the necessary hardware into the drive bay
bracket, replace the bracket into the chassis, and fasten
the 8 screws attaching it to the chassis.
5. Make the necessary cable connections from the rear of
the chassis and replace the rear panel.
2.5 Powering Up the System
Connect the supplied power cord to the socket on the back of the
chassis. All supplied PSUs are full range 90-240VAC and do not
require input voltage setting. Insert the desired boards into the
appropriate card slots as described in Sections 2.2 and 2.3.
The cPCIS-3330 Series features a guarded power switch. Use a
suitably shaped object (such as a pen) to actuate the power
switch. After the system is powered up, all LEDs will light up to
indicate normal operating conditions.