ADLINK Technology cPCIS-3330 Series, Руководство пользователя

Страница: 20 / 76

12 Getting Started
2.4 Drive Bay Access
To install the required hardware in the two 5.25”, one 3.5”, and
one slim type CD-ROM drive bays, follow the procedure below:
1. Loosen the 8 screws securing the drive bay bracket to
the cPCIS-3330 chassis as shown in the figure below.
Figure 2-5: Remove drive bay bracket fastening screws
2. Loosen the 8 screws fastening the PSU rear panel to the
chassis as shown in the figure below. Remove the rear
panel, reach inside the chassis, and push the drive bay
bracket forwards out of the chassis.
3. Undo the screws attaching the drive bay blanking covers
to the drive bay bracket as required. Note the locations
of the CD-ROM drive bay blanking cover screws in the
figure below.