ADLINK Technology COM Express Express-HLE Скачать руководство пользователя

Страница: 87 / 89

Express-HLE

Page 87

Safety Instructions

Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and

operating instructions for future use.

•

Please read these safety instructions carefully.

•

Please keep this User‘s Manual for later reference.

•

Read the specifications section of this manual for detailed information on the operating environment of this equipment.

•

When installing/mounting or uninstalling/removing equipment, turn off the power and unplug any power cords/cables.

•

To avoid electrical shock and/or damage to equipment:

Keep equipment away from water or liquid sources.

Keep equipment away from high heat or high humidity.

Keep equipment properly ventilated (do not block or cover ventilation openings).

Make sure to use recommended voltage and power source settings.

Always install and operate equipment near an easily accessible electrical socket-outlet.

Secure the power cord (do not place any object on/over the power cord).

Only install/attach and operate equipment on stable surfaces and/or recommended mountings.

If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source.

•

Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel.

Содержание COM Express Express-HLE


























































































Результаты поиска

Содержание COM Express Express-HLE

Отзывы:

Похожие инструкции для COM Express Express-HLE

Бренды по названию

Популярные бренды

ADLINK Technology COM Express Express-HLE, Руководство пользователя

Результаты поиска

Содержание COM Express Express-HLE

Отзывы:

Похожие инструкции для COM Express Express-HLE

Бренды по названию

Популярные бренды