ADLINK Technology COM Express Express-BL Скачать руководство пользователя

Страница: 74 / 90

Page 74

7.5.

Security

7.5.1.

Password Description

Feature

Options

Description

Administrator Password Enter

password

User Password

Enter password

HDD Security Configuration:

Info only

Px: xxxxxxxx

Info only

7.6.

Save & Exit

7.6.1.

Reset Options

Feature

Options

Description

Save Changes and Reset

Save changes and reset the
system.

Save Changes and Reset

Discard Changes and Reset

Reset the system without
saving any changes.

Discard Changes and Reset

7.6.2.

Save Options

Feature

Options

Description

Save Changes

Save Changes done so far to any of the setup options.

Discard Changes

Discard Changes done so far to any of the setup options.

Restore Defaults

Restore/Load Default values for all the setup options.

Save as User Defaults

Save the changes done so far as User Defaults.

Restore User Defaults

Restore the User Defaults to all the setup options.

Содержание COM Express Express-BL



























































































Результаты поиска

Содержание COM Express Express-BL

Отзывы:

Похожие инструкции для COM Express Express-BL

Бренды по названию

Популярные бренды

ADLINK Technology COM Express Express-BL, Руководство пользователя

Результаты поиска

Содержание COM Express Express-BL

Отзывы:

Похожие инструкции для COM Express Express-BL

Бренды по названию

Популярные бренды