Important: CHARGE THE FIXTURES FOR 6-8 Hours before use. Plug in
Power cord. Turn off Power Switch and Turn on battery switch to charge.
Introduction
Unpacking:
Thank you for purchasing the WIRELESS-HEX-9 Battery Powered Wireless
DMX Flat Par Up-Light by Adkins Professional Lighting. Every WIRELESS-HEX-9 has been
thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton appears to
be damaged, carefully inspect your fixture for any damage and be sure all accessories
necessary to operate the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our customer support number for further instructions. Do not
return this unit to your dealer without first contacting customer support.
Introduction:
The Light is a DMX intelligent and battery powered LED par light. This par light
is light weight and compact which makes it a great piece for mobile DJ
‟s and clubs.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to
rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. In the unlikely event your unit
may require service please contact the manufacturer or your dealer.
General Instructions
To optimize the performance of this product, please read these operating instructions carefully
to familiarize you with the basic operations of this unit. These instructions contain important
safety information regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
●
Fuse standard is 5A/250V
●
Grounded using yellow/green line
●
The ambient temperature must always be under +35° C
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in your area
matches the required voltage for your light is workable in 100-220V/50~60Hz. Because line
voltage may vary from venue to venue, you should be sure your unit voltage matches the
wall outlet voltage before attempting to operate you fixture.
Charging:
There are two buttons on the rear panel of the light. One is for power, and the other is for
Battery.
When charge the light, please switch the Power button “off” and the Battery button
"on". If the Battery button is not switched on for charging the battery will not charge. There is a
2
