Understanding the wireless:
There are 7 different wireless frequency colors. You can change the color of the light's
wireless by pressing the little wireless "selector button" next to the wireless color LED. Every
time you press the button it will change to a different color. The 7 colors represent 7 different
frequency bands. All of your lights and controller will need to be on the same color to work
together.
Also understand what it means when the status led is flashing. If your light or controller
wireless is receiving it will be flashing "GREEN". If it is transmitting a signial it will be flashing
"RED". The system will not work with more than one unit transmitting on the same wireless
color. The only way your light will be transmitting is if your ligh is set to "MASTER" (see
above).
If your light reads "Stby" that means it is in slave mode and is waiting for a signal from a
master or controller.
Operating Instructions
Operating Modes:
●
Sound activation
– The unit will activated by the sound signal.
●
Static display
– The unit will display a static color.
●
Auto Mode -The unit will automatically chase through the different patterns.
●
DMX control mode -This function will allow you to control the lighting with a standard DMX
512 controller.
Static Color without a controller
Press "Menu" until the display reads "CL01" - Press "enter"
Setting Light to work with the Adkins EZ-Control 5
Press “Menu” until the display reads “d001”
You may need to us the up & down to change the number to 001
Make sure your wireless on the controller is set to the same color as the light fixture.
DMX Mode:
Operating through a DMX controller give the user the freedom to create their
own programs tailored to their own individual needs. This function also allows you to use
your fixtures as pattern changing lights.
1. This function will allow you to control each individual fixtures traits with a standard DMX
512 controller.
2. The light uses 6 or 10
DMX channels to operate. Please see “DMX channel and Functions”
for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any
standard DMX controller. Set your desired DMX address following the setup specifications
that come with your DMX controller.
5
