Page 5
Safety Tips (cont.)
OPERATING AMBIENT TEMPERATURE RANGE
-
the
operating ambient temperature range is 0
o
C - 35
o
C,
(32
o
F - 104
o
F)
and humidity of 20 - 80%. This heat press is
fitted with a thermal cut out to ensure that it cannot operate
above 235
o
C
15
o
C
(455
o
F
27
o
F).
MACHINE FUSES
- type: ultra-rapid (FF) fuses 1¼”. (230
Vac max. 12.5 Amps)
WARNING - THIS APPARATUS MUST BE EARTHED
(GROUNDED)
CAUTION
This machine gets hot whilst operating. Take care not to touch
any surfaces that are labelled “Caution this plate is HOT”.
MACHINE OPERATION
Only suitably trained personnel should operate this
machine.
This machine is designed to be operated by one operator
only.
If any hissing noises of pneumatic leaks occur the machine
must be immediately shut down for investigation.
If the air pressure is lost the table will lower. The machine
should be switched off immediately or the situation could arise
of the table rising under power without the operator’s hands
being safely on the two start buttons.
Contact
your print media suppliers to ascertain whether fumes
are given off during the process, and if so what precautions are
needed for operator safety. These may include air extraction
and/or masks for personnel.
Please refer to Page 14 for an illustration of the Beta Major
machine.
