ADK-16300 Administrator guide
یا ژاساپ بنج رصعیلو نادیم : سردآ
کلاپ قیاقش نابایخ ناینار
8
دحاو
1
: نفلت
1811
8888
121
: سکاف
1111
8888
121
WWW.KAVOSHPHONE.COM
@ADKPBX
72 / 99
Please refer to RFC1918 for more information.
External host
Alternatively you can specify an external host, and the
systemwill perform DNS queries periodically.This setting
is onlyrequired when your public IP address is not
static. It isrecommended that a static public IP address
isused with this system. Please contact your ISP for
more
information.
NAT mode
Global NAT configuration for the system; the options for
thissetting are as follows:
Yes = Use NAT. Ignore address information in the
SIP/SDPheaders and reply to the sender's IP
address/port.
No = Use NAT mode only according to RFC3581.
Never = Never attempt NAT mode or RFC3581 support.
Route = Use NAT but do not include report in headers.
RTP Port Start
Beginning of RTP port range
UDP port
Port used for SIP registrations, Default is 5060
TCP port
Port used for SIP registrations, Default is 5060
TLS port
Port used for SIP registrations, Default is 5061
TLS Verify Server
When using ADK-16300 as a TLS client, whether or not
to verify server’s certificate. It is “No” by default.
TLS Ignore
Common
Name
Set this parameter as “No”, then common name must
be the same with IP or domain name.
TLS Verify Client
When using ADK-16300 as a TLS server, whether or not
to verify client’s certificate. It is “No” by default.
TLS Client Method When using ADK-16300 as TLS client, specify the
protocol for outbound TLS connections. You can select
it as tlsv1, sslv2 or sslv3.
3.8.1.3Qos
Figure 3.8.1.3 Qos