ADK-16300 Administrator guide
یا ژاساپ بنج رصعیلو نادیم : سردآ
کلاپ قیاقش نابایخ ناینار
8
دحاو
1
: نفلت
1811
8888
121
: سکاف
1111
8888
121
WWW.KAVOSHPHONE.COM
@ADKPBX
53 / 99
1) General
·Route Name
A name for this inbound route. E.g. “default”.
·DID Number
Define the expected DID Number if this trunk passes DID on incoming calls.
Leave thisfield blank to match calls with any or no DID info. You can also use
pattern matching tomatch a range of numbers. The following patterns may be
used:
X
: Any Digit from 0-9
Z
: Any Digit from 1-9
N
: Any Digit from 2-9
[12345-9]
: Any digit in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
The “
.
” Character will match any remaining digits. For example, “9011.” will
match anyphone number that starts with “9011”, excluding “9011” itself.
The “
!
” will match none remaining digits, and causes the matching process to
complete assoon as it can be determined that no other matches are possible.
Example 1:
NXXXXXX
will match any 7-digit phone number.
Example 2:
1NXXNXXXXX
will match a phone number starting with a 1,
followed by a3-digit area code, and then 6-digit number.
·Extension
Define the extension for DID number. This field is only valid when you use
BRI, SIP, SPSor SPX trunk for this inbound router. You can only input number
and “-” in this field and theformat can be xxx or xxx-xxx. The count of the
number must be only one or equal to thecount of the DID number.
·Caller ID Number
Define the Caller ID Number to be matched on incoming calls. Leave this field