ADJ Products, LLC - www.adj.com - WiFly EXR HEX Par User Manual Page 13
ADJ Products, LLC - www.adj.com - WiFly EXR HEX Par User Manual Page 12
WiFly EXR HEX Par Operating Instructions
the UP and DOWN buttons to adjust the intensity. After you have
finished adjusting the intensity, or you would like to skip to the
next color, press the SET UP button.
3. When “G.XXX” is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust the intensity.
4. When “b.XXX” is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust the intensity.
5. When “U.XXX” is displayed you are in White dimming mode. Press
the UP and DOWN buttons to adjust the intensity.
6. When “A.XXX” is displayed you are in Amber dimming mode.
Press the UP and DOWN buttons to adjust the intensity.
7. When “u.XXX” is displayed you are in UV dimming mode. Press
the UP and DOWN buttons to adjust the intensity.
8. After you have adjusted the RGBWA & UV colors to make your
desired color you can then activate strobing by pressing the SET
UP button to enter the strobe mode.
9. “FS.XX” will be displayed, this is strobe mode. The Flash can be
adjusted between 00 (flash off) to 15 (fastest flash).
Auto Mode:
There are 3 different Auto Modes to choose from; Color Fade, Color
Change, and both modes running together. The running speed is
adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either “AFXX”,
“AJXX”, or “A-JF” is displayed. Press the SET UP button to scroll
through the 3 different modes.
• AFXX = Color Fade mode, there are 16 Color Fade shows to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Fade modes.
• AJXX = Color Change mode, there are 16 Color Change shows to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired Auto Mode press the SET UP
button until “SP.XX” is displayed. When this is displayed you can
adjust the running speed of your Auto Mode. Use the UP or
DOWN button to adjust the speed between “SP.01” (slowest) and
“SP.16” (fastest). Once you have set your desired running
WiFly EXR HEX Par Operating Instructions
speed, press the SET UP button to return to your desired Auto
Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLXX” is dis-
played.
2. There are 63 colors to choose from. Use the UP and DOWN but-
tons to scroll through the 63 colors. After you have found your
desired color you can activate strobing by pressing the SET UP
button to enter the Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as spot lights. The WiFLY
Par QA5 has 5 DMX modes: 6 Channel mode, 7 Channel mode, 8
Channel mode, 11 Channel mode, and a 12 Channel mode. See
pages 19-26 for each mode’s DMX traits.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
“d.XXX” is displayed. “XXX” represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address. then press the SET UP button to select your DMX
Channel mode.
3. When you press SET UP “ChXX” should be displayed. “XX” repre-
sent the current DMX Channel Mode.
4. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
To run the 6 Channel Mode, press the MODE button until “Ch06”
is displayed. This is the 6 Channel DMX Mode.
To run the 7 Channel Mode, press the MODE button until “Ch07”
is displayed. This is the 7 Channel DMX Mode.
To run the 8 Channel Mode, press the MODE button until “Ch08”
is displayed. This is the 8 Channel DMX Mode.
To run the 11 Channel Mode, press the MODE button until “Ch11”