ADJ WiFly Chameleon Скачать руководство пользователя страница 4

ADJ Products, LLC   -  www.adj.com  - WiFly Chameleon User Manual Page 3

•  Multi-Colors

•   Five Operating Modes

•  Electronic Dimming 0-100%

•   Built in Microphone

•   DMX-512 protocol

•  3-Pin & 5-Pin DMX Connection

•   Six DMX Modes: 6 Channel Mode, 7 Channel Mode, 9 Channel  

    Mode, 11 Channel Mode, 18 Channel Mode, and 20 Channel    

 Mode.

•  Snoot Frame Included to help limit unwanted light exposure

•  ADJ LED RC4 compatible (Not Included), UC IR compatible (Not  

  Included), and Airstream IR compatible.

•  Power Cord Daisy Chain (See page 17)

  WiFly Chameleon   

                   Warranty Registration

  WiFly Chameleon                                                  Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations 

of this unit. These instructions contain important safety information 

regarding the use and maintenance of this unit. Please keep this manual 

with the unit, for future reference.

  WiFly Chameleon  

 

           General Instructions    

The WiFly Chameleon carries a 2 year limited warranty. Please fill out 

the  enclosed  warranty  card  to  validate  your  purchase.  All  returned 

service items whether under warranty or not, must be freight pre-paid 

and accompany a return authorization (R.A.) number. The R.A. number 

must be clearly written on the outside of the return package. A brief 

description of the problem as well as the R.A. number must also be 

written down on a piece of paper included in the shipping carton. If 

the unit is under warranty, you must provide a copy of your proof of 

purchase invoice. You may obtain a R.A. number by contacting our 

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number 

on the outside of the package will be returned to the shipper.

  WiFly Chameleon                                   Fuse Replacement

Disconnect the unit from its power source. Remove the power cord 

from the unit. Once the cord has been removed, you will find that the 

fuse holder is located inside the power socket. Insert a flat-head screw 

driver into the power socket and gently pry out the fuse holder. Remove 

the bad fuse and replace with a new one. The fuse holder also has a 

holder for a spare fuse.

With  this  feature  you  can  connect  the  fixtures  to  one  another 

using the IEC input and output sockets. The quantity that can be 

connected is 12 fixtures maximum. After 12 fixtures you will need 

to use a new power outlet. They must be the same fixtures. DO 

NOT mix fixtures.

  WiFly Chameleon                         Power Cord Daisy Chain

  WiFly Chameleon                                              Installation

The WiFly Chameleon is fully operational in three different mounting 

positions, hanging upside-down from a ceiling, hanging sideways on 

trussing, or set on a flat level surface. The unit should be mounted 

using a mounting clamp (not provided), affixing it to the mounting 

bracket that is provided with the unit. Always ensure that the unit is 

firmly fixed to avoid vibration and slipping while operating. Always 

ensure that the structure to which you are attaching the unit is secure 

and is able to support a weight of 10 times the unit’s weight. Also, 

always use a safety cable that can hold 12 times the weight of the 

unit when installing the fixture.

The equipment must be installed by a professional, and it must be 

installed in a place where it is out of the reach of people’s grasp.

ADJ Products, LLC  -  www.adj.com  - WiFly Chameleon User Manual Page 32

  WiFly Chameleon                          Adjustable Sitting Angle

The standing angle of the unit can be manually adjusted by turning 

the knob on the front panel counter clockwise. Turning this knob will 

allow the bottom front part of the unit to lower so that the unit can sit 

at a desired angle. Turn the knob clockwise to lock the position.

Содержание WiFly Chameleon



















Отзывы: