Rotobeam 4 Safety Precautions
ADJ Products, LLC - www.adj.com - Rotobeam 4 User Manual Page 4
ADJ Products, LLC - www.adj.com - Rotobeam 4 User Manual Page 5
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 3 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
Rotobeam 4
Operation
General Operation:
The ADJ Rotobeam 4
contains an automatic
voltage switch, which will auto sense the voltage when it is plugged into
the power source. With this switch you do not need to worry about wall
voltage, this unit can be plugged in anywhere. This fixture is designed
to operate as a stand alone unit. It has been tested and there is no
assembly necessary. The Rotobeam 4 is ready to be plugged in out of
the box. Plug the unit in and light output will be immediate.
Rotobeam 4
IR Remote
The optional UC-IR infrared remote (sold separately) has many dif-
fernet functions and gives you complete control of your Rotobeam 4.
To control the your desired fixture you must aim the controller at the
front of the fixture and be no more the 30 feet away.
STAND BY
-
Pressing this button will blackout the fixture.
FULL ON
-
Hold this button down for temporary full output.
FADE/GOBO
-
When sound mode is on, the fixture will fade from one
color to the other, and the rotation will be sound active. When sound
mode is off, the unit will fade from one color to the other, and the unit
will rotate slowly.
COLOR
-
Press this button, use buttons 1-9 to select the different
colors. Use the dimmer buttons to adjust the output intensity. Press
this button again to deactivate this function.
“ and DIMMER -” -
These buttons will increase and de-
crease the output intensity.
STROBE
-
Press and hold this button to perform random strobe.
SPEED
-
Invalid for this fixture.
SOUND ON & OFF -
These buttons activate and deactivate the
sound active mode.
SHOW -
Press this button, then use buttons 1-9 to change the inter-
nal program. Numbers 1-5 is the LED effects and numbers 6-9 will
control motor speed. Press this button again to deactivate this func-
tioin.
