Revo 4 IR
Cleaning
Revo 4 IR
Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Revo 4 IR Fuse Replacement
First unplug the power. The fuse holder is located above the power
cord input. Using a flat-head screw driver unscrew the fuse holder.
Remove the bad fuse and replace with a new one.
ADJ Products, LLC - www.adj.com - Revo 4 IR Instruction Manual Page 16
ADJ Products, LLC - www.adj.com - Revo 4 IR Instruction Manual Page 17
Revo 4 IR
Traits & Values - 4 Channel DMX Mode
Revo 4 IR Traits & Values - 256 Channel DMX Mode
Using 4 Channel DMX Mode:
To project a pattern using Channel 2, the Channel values must
be between 10-99. This also applies to changing the pattern
color using Channel 3.
To run the chases using Channel 2, the Channel 1 values must
be between 100-239. This also applies to controlling the chase
speed using Channel 3.