ADJ Products, LLC - www.adj.com - Revo 4 IR Instruction Manual Page 12
ADJ Products, LLC - www.adj.com - Revo 4 IR Instruction Manual Page 13
Universal DMX Control:
This function allows you to use a univer-
sal DMX-512 controller. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Revo 4 IR has 4 DMX channel mode and a 256 DMX channel
mode. To set the channel mode see page 9. See page 16 a for
detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until “
SOUN
” is displayed, and press
ENTER. Press the UP or DOWN buttons so that “
ON
” is dis-
played and press ENTER.
2. Press the MENU button until “
SENS
” is displayed, and press
ENTER. Use the UP and DOWN buttons to adjust the sound
sensitivity. Press ENTER when you have found your desired sensi-
tivity level.
Show Mode:
This mode allows a single unit or several units linked
together, to run 1 of 12 light shows. Show mode can be run with sound
active mode on or off.
1. Press the MENU button until
“SHND” is displayed, and press
ENTER.
2.
Press the UP or DOWN buttons until you find your desired show,
and press ENTER to confirm.
Revo 4 IR
Operation
Revo 4 IR
System Menu
TEST
- This function will run a self test program.
1. Press the MENU button until “TEST” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “FHRS” is displayed, press ENTER.
2. The display shows the running time of the unit. Press MENU to
exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the MENU button until “VER” is displayed, press ENTER.
2. The display will show the software version.