ADJ Products, LLC - www.adj.com - Jellyfish IR Instruction Manual Page 9
ADJ Products, LLC - www.adj.com - Jellyfish IR Instruction Manual Page 8
Jellyfish IR
System Menu
Jellyfish IR
System Menu
System Menu: When making adjustments you can press
ENTER to confirm your setup or you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR -
DMX Address Setting
.
1. Press either the MENU button until “ADDR” is displayed,
press ENTER.
2. The current DMX address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
CHND -
This will let you the DMX Mode you want to run.
You can choose between 3 channel mode and 28 channel
mode.
1. Press the MENU button until “CHND” is displayed, press
ENTER. Either “3CH” or “28CH” will be displayed.
2. Press the UP or DOWN buttons until your desired DMX chan-
nel mode is displayed, press ENTER to confim. See page 7 for
DMX Channel modes and traits.
SLND -
This will let you set unit as a slave in a master/
slave configuration.
1. Press the MENU button until “SLND” is displayed, press
ENTER. Either “MAST”, “SL 1”, or “SL 2”, will be displayed.
2. Press the UP or DOWN buttons until your desired mode set-
ting is displayed, press ENTER to confim.
Note: Each slave mode is a different light show.
NOTE: In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to “SL 2”, the fixtures
will now have contrast movement to each other.
