ADJ ENCORE BURST RGBW IP, Инструкция пользователя, Страница: 21 / 23

ADJ Products, LLC - www.adj.com - Encore Burst RGBW IP User Manual Page 20
Encore Burst RGBW IP Trouble Shooting
Encore Burst RGBW IP Cleaning
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on
some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be car-
ried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog
residue, dust, dew).
Encore Burst RGBW IP Dimensional Drawings
9.8”
/ 249mm
9.21” / 234mm
12.12”
/ 308mm
6”
/ 153mm